
Sauna control: steam generator
The HNS-M2 steam generator is a great choice for steam showers and residential custom built steam rooms, while meeting the toughest demand of public steam rooms requiring continuous steam flow for all day operation.
- Acid resistant stainless steel tank.
- Incalloy interchangeable heating elements
- Electronic low water shut-off
- Over Temperature cut out fuse
- Pressure relief valve
- Easy De-scaling
A 2 step temperature control produces an even steam feed.
There is an optional auto flush system available, which drains the tank after each use, a real benefit in regions with hard water.
Two sauna control panel options

Control panel
The Midi control panel is the most Popular choice for residential steam rooms as it can be mounted inside the steam room utilising the built-in thermostat sensor. For customers wishing to mount the panel outside the steam room, an additional thermostat sensor is required.
The operation time can be programmed between 0-23 hours
The temperature range is 25-50C
Size: 180 x 55 x 8mm
Push button
The push button is a simple On/Off controller which runs the steam generator on full power for 30 minute time cycles. With the factory set time limit there is no thermostat sensor required.
The push button can be installed either inside or outside the steam room.

T1 steam control panel
- Touch buttoned glass surface.
- Proximity sensor to turn On
- Service Reminder
- Displays Celsius/Fahrenheit and 12h/24h time format
- Multilingual user interface
- Service reminder
Size: 140 x 80 x 20mm
